Main purpose of wire wound filter element
1. Food and beverage industry: mineral water, syrup, alcohol, edible oil, beverage water, cola beverage, etc.
2. Electronic industry: pure water, organic solvent, printed circuit board, electroplating, etc.
3. Acrylic, oil, chemicals, chemicals, printing fluids, and other raw materials.
4. Industrial oil: hydraulic oil, lubricating oil, cutting oil and other industrial oils.
5. Pharmaceutical industry: syrup, alcohol, configuration water, VC raw materials, tetracycline solution, oxytetracycline solution, injection, etc.
6. Others: resin lens, bearing cleaning, laser cooling water, ultrasonic cleaning solution, electroplating solution, etc.
Technical parameters and precautions of wire wound filter element
1.Filtering accuracy: 1 μ m,5 μ m，10 μ m，20 μ m，30 μ m，50 μ m，75 μ m，100 μ m。
2. Outer diameter of filter element: φ 60mm， φ 65mm。
3. Inner diameter of filter element: φ 28mm， φ 30mm。
4. Polypropylene wire wound filter element can use water, acid-base, chemical solution and other non organic solutions, and the service temperature is ≤ 60 ℃.
5. The center rod of absorbent cotton fiber filter element is made of stainless steel. It is used for organic solvent, water, oil, alkaline solution, beverage, medicine, etc. the service temperature is 120 ℃.
6. Filter element length: 10 ″, 20 ″, 30 ″, 40 ″.
7. Maximum withstand voltage: ≤ 0.5MPa; Maximum pressure drop: 0.2MPa.
8. Maximum working temperature: polypropylene thread: Polypropylene skeleton ≤ 60 ℃; Stainless steel skeleton ≤ 80 ℃. Degreasing cotton thread: stainless steel skeleton ≤ 120 ℃.
