In daily work, the use of large flow filter is more frequent, because the role of large flow filter is also very obvious. So, in addition to the daily use of large flow filter, do you need to do some simple protection?
Protection methods and strategies for large flow filter element:
1. Check the O-ring first, and then seal the cleaned filter element and put it flat in the sealing groove;
2. Wet the O-ring with process liquid;
3. Remove the packaging bag, cover the head, and tighten the compression bolt of lifting ring;
4. Open the vent valve on the top of the shell;
5. Open the inlet valve a little to make the liquid enter the shell until the liquid flows out of the vent valve and close the vent valve;
6. Gradually open the outlet valve, and then slowly open the inlet valve effectively;
7. Wash the filter element with flow for 5 ~ 10 minutes;
8. The filter element shall not be subjected to the impact of large flow, nor shall it be subjected to heavy pressure in the opposite direction.
The wound filter core is made of textile fiber yarn with good filtration performance, which is precisely wound on the porous framework. Its yarn materials include polypropylene fiber, acrylic fiber, absorbent cotton fiber, etc. When winding, the filter elements with different precision can be made by controlling the winding tightness and density.
High filtration precision, large flow, small pressure difference, high pressure strength, large contaminant capacity, non-toxic and tasteless, no secondary pollution.
High filtration precision, small pressure difference, large flow, large capacity of contaminant, long service life;
The filtering aperture is small in the inner and large in the outer, which has a good deep filtering effect;
The filter element is made of various materials to ensure the requirements of various liquid filtration and achieve the best filtration effect.
