The wire wound filter element is a deep-seated filter element, which is used for filtration with high viscosity and low impurity quality. It is made around the top edge of porous structure frame (polypropylene or stainless steel plate) according to special processing technology. It has a honeycomb structure with external sparse and internal density. The wire wound filter element can reasonably remove suspended solids, particles in liquid Rust and other dirt have excellent filtration characteristics.
It can mainly show the actual filtering effect of deep-seated filter materials. The ideal standard is that the density of the filter material is getting more and more dense from outside to inside. Therefore, when winding, the relative density of the filter material must be controlled by the cable size or different winding support force. Only with the entangled filter elements of this kind of internal and external sparse structure can the deep-seated practical effect of the deep-seated filter material be available, The output power of the filter is improved reasonably, and a large number of dirty particles are prevented.
The precision of the wire binding filter is determined by the size of the cable and the relative density around it. The finer the cable, the closer it can be, the smaller the porosity and the higher the precision; Similarly, the more dense the cable structure, the higher the filtration precision. It is not known that the filter material must maintain its special structure and diameter in the whole process of filtration, so as to provide stable and uniform filtration quality.
The total flow rate of the filter element around the line is large, the working pressure loss rate is small, the load of the filter slag is large, and the service life is longer than that of the quasi high filter. According to the characteristics of the filtrate, there are many different raw materials for us to select and apply. The product and the force also have a very good compatibility mode.
