A wire-wound filter element is used in power plants

A wire-wound filter element is used in power plantsBoiler water: the boiler supply water is mainly provided by the electric water supply pump, except the boiler water which turns into steam, which is powered by the water pump to cool down in the cooling tower (cooling tower: the tall building with two large ends and a thin middle).Water treatment and recycling after cooling,The water treated by chemical water in the power plant mainly comes from the water containing chemical components produced after ash and sulfur removal. The main process is: chemical wastewater → wastewater storage tank → oxidation tank → reaction tank →pH adjustment tank → mixing tank → coagulation and clarification tank → clean water tank (water quality monitoring)→ coal ash water system.The sludge discharged from the bottom of the clarifier is concentrated in the concentrator and sent to the sludge dehydrator for dehydration.Return clean water to waste water storage tank.In the process, a large number of water filter elements will be used, such as wire wound filter element, melt jet filter element.Technical parametersFilter medium: waterOperating temperature: -10 ~ +100℃Maximum differential pressure: 1.6mpaFiltering accuracy: 1 to 100 secondsMaterial: ppWire-wound filter element can effectively remove suspended solids and particles in liquid.High flow, low pressure loss.High filter load and long service life.Can withstand high filtration pressure.According to the nature of the filtered liquid, the filter element has a variety of different materials to choose from, so that the filter element and the filtrate have good compatibility.