10 Inch String Filter Cartridge

Our 10-inch string wound filter features proprietary gradient density winding construction, engineered with a layered depth filtration structure. Coarser suspended solids get trapped on the cartridge's outer winding layers, while progressively finer contaminants are captured deep within inner winding channels.

This core depth filtration design outperforms conventional surface-style sediment cartridges, especially in heavily contaminated raw water conditions prone to high solids loading. Unlike low-grade loosely wound alternatives that clog rapidly under heavy dirt loads, our graded winding maximizes contaminant retention without sacrificing stable liquid throughput. For bulk buyers, distributors and project procurement teams, this design translates directly into tangible operational perks:

• Extended service intervals and fewer filter change-outs
• Minimized unplanned system downtime
• Consistently reliable filtration output long-term
• Substantial reduction in ongoing operational expenditure

Engineered to seamlessly fit all industry-standard 10-inch filter housings, this wound filter is stocked in an expansive range of micron grades to match diverse source water quality and custom filtration specifications.

1. Exceptional Dirt Holding Capacity

Precision-calibrated layered yarn winding creates tapered, progressively narrowing internal flow passages across the entire filter depth. Large grit and particulate settle at the outer wrap, with minute impurities trapped deep into the cartridge matrix.

Rather than blocking up quickly from surface-only contaminant buildup seen on cheap filters, our full-depth containment spreads captured sediment uniformly throughout the filter's entire structure. The end result is drastically extended service cycles and lowered recurring filter replacement expenses for end-users.

2. Consistent Flow Stability Under Operating Pressure

Budget-grade sediment filters commonly suffer sharp flow drop-off and rapid pressure spike after short run times due to uneven loose winding. Our pre-calculated graded winding density avoids premature channel blockage, sustaining balanced flow even as particulates accumulate inside the cartridge.

For industrial plant operators and procurement managers, this stable performance delivers key practical benefits:

• Steady system working pressure with no abrupt fluctuation
• Enhanced safeguarding for downstream pumps and precision process equipment
• Reduced mechanical strain on circulating pump assemblies
• Cut-down power draw and lower long-term energy spending

3. Premium Full-Depth Filtration Efficiency

Built around genuine depth filtration technology instead of basic surface straining, fluid travels through multi-tiered winding layers to reliably capture rust flakes, sand grains, fine silt and all manner of suspended solid contaminants. This robust particulate removal capability makes the cartridge an indispensable pre-treatment component within:

• Reverse Osmosis pre-treatment lines
• Boiler feedwater preparation systems
• Factory industrial recirculating process water loops
• Raw groundwater purification projects

4. Broad Chemical Compatibility

Available in three core media configurations (Polypropylene, Cotton, Fiberglass), each raw material complies with FDA material listings for potable drinking water and food-contact liquid applications.

• PP Yarn + PP Core: Excellent resistance against dilute acids, alkalis and most common industrial oxidizing chemicals
• Cotton Yarn + Stainless Steel Core: Compatible with organic solvents, edible beverages, pharmaceutical formulations and alkaline solutions
• Fiberglass Yarn + Stainless Steel Core: Outstanding tolerance for aggressive strong acids, caustic alkalis and high-temperature chemical fluids

Wide chemical inertness eliminates application compatibility headaches for global importers and OEM manufacturers operating across varying regional feed liquid compositions.

5. Versatile Micron Grade Options

Stock nominal micron ratings span from 1μm up to 150μm to align with varied filtration precision requirements, core regular options include:

1μm / 5μm / 10μm / 20μm / 50μm / 100μm

Such flexible sizing empowers regional distributors and engineering contractors to select the exact filter fineness tailored to unique local feedwater and downstream equipment parameters.

Max allowable differential pressure: 4.5 bar @ 25°C ambient temperature

Suggested filter replacement threshold: Replace cartridge once differential pressure hits 1 ~ 1.5 bar

Maximum continuous working temperature by construction:

✅ PP Yarn + PP Inner Core: 80°C Max

✅ Cotton Yarn + Stainless Steel Core: 180°C Max

✅ Fiberglass Yarn + Stainless Steel Core: 200°C Max

Our 10-inch string wound filter cartridges serve as reliable pre-filtration elements across multiple vertical industries:

1. Industrial Water Treatment: Primary pre-filter to shield costly RO membranes, booster pumps and downstream precision filtration gear from abrasive particulate damage

2. Food and Beverage Production: Clarify process and ingredient water by stripping suspended sediment for beverage, edible food and pharmaceutical production lines (FDA-approved food-safe construction available)

3. Chemical Processing: Filter bulk organic solvents, mild corrosive chemical blends and factory process liquors across varied PH ranges

4. Electroplating and Electronic Manufacturing: Remove microscopic suspended impurities to prevent surface defects during component plating and precision electronic fabrication

5. Municipal Waterworks: Front-end pre-treatment filtration to improve purification efficiency for large-scale public drinking water facilities

6. Domestic and Commercial Water Purification: Drop-in compatible with standard whole-home filtration setups and commercial drinking water processing units

1.Build Construction

Filter Yarn Medium: Polypropylene / Cotton / Fiberglass (3 core material variants for different chemical and thermal needs)

Inner Support Core: Polypropylene or 304 Stainless Steel available for alternate temperature and chemical resistance

Standard Dimensions: ID 28mm | OD 62~65mm (standard specification; jumbo OD 110~115mm customizable upon request)

End Cap and Sealing Choices: Multiple adaptor + gasket combinations including DOE/Fin/Flat closed end configurations with EPDM, Buna-N, Silicone or Viton sealing options

Available Lengths: 5",10",20",30",40",50",60" (10-inch as flagship stock size)

2.Flow vs Pressure Drop Performance

As demonstrated by our performance curve, finer micron grades (1μm/5μm) deliver tighter filtration with gradual pressure elevation as flow increases, while coarser 50μm/100μm variants maintain minimal pressure drop even under elevated flow rates up to 45LPM, letting clients balance filtration precision and flow efficiency per site demands.

ANDA Filter delivers end-to-end technical assistance to international importers, wholesalers and engineering clients:

• Expert micron rating selection consultation matched to your source water test reports
• Filter housing cross-reference and compatibility matching guidance
• Full OEM and private-label customization service (custom branding, print and packaging)
• Bespoke dimensional and non-standard packaging development
• Competitive bulk order pricing and consolidated shipment solutions
• Complete export documentation preparation for global customs clearance

For project-specific bulk orders, our in-house engineering team drafts customized pre-filtration layouts based on on-site raw water conditions and targeted downstream purity benchmarks.

We understand bulk filter procurement hinges on consistent long-term product reliability far beyond upfront unit pricing, which is why ANDA Filter provides full lifecycle after-market assistance for all global partners:

• Rapid lead-time turnaround for repeat bulk production orders
• Strict batch-to-batch production consistency with standardized winding QC
• Export-grade shock-resistant carton packaging for long-distance ocean transit
• Unlimited post-purchase technical troubleshooting and application consultation
• Customized service-life & replacement-cycle guidance per your operating environment
• Long-term exclusive distributor cooperation policies and tiered pricing incentives

Stable uniform product quality drastically cuts your end-customer complaint rates and drives recurring reorder business for global distributors.

1. Specialized Filtration Manufacturing Expertise: Centered exclusively on wound filter and depth filter production with standardized production workflows and rigorous in-process quality audits.

2. Full OEM and Export-Focused Production Capacity: Flexible custom labeling, bespoke carton artwork and private-label OEM runs tailored to worldwide wholesaler branding requirements.

3. Controlled Consistent Product Quality: Every filter cartridge is wound under fixed density calibration to guarantee identical dirt loading and flow characteristics across all production batches.

4. Factory-Direct Cost Advantage: Direct-from-manufacturer sourcing eliminates middleman markup, letting you secure premium-grade filters at competitive landed cost.

5. Global Market Adaptability: Our product portfolio complies with varied regional water treatment industry norms across global markets to satisfy localized application standards.

Q1: What contaminants can this wound filter physically remove from liquid?

It's engineered specifically to trap coarse to fine solid impurities including sediment, rust scale, sand, fine silt and all visible suspended particulate matter within process fluids.

Q2: What is the typical service cycle before filter replacement?

Service life varies based on incoming raw water contamination levels and daily operating flow volume; under regular municipal feedwater conditions, average usable lifespan ranges from 3 to 6 months per cartridge.

Q3: Will this 10-inch filter fit my existing filter housing?

Yes, our core 10-inch dimension is built to match universal industry-standard filter housings globally. Custom OD/ID sizing available for non-standard housings via OEM order.

Q4: Can I order private-label OEM packaging for resale?

Absolutely, ANDA offers full OEM customization including custom printed labels, brand cartons and tailored export packaging designs for resale clients.

Q5: How do I pick the correct micron rating for my system?

1~5μm: Ultra-fine pre-clarification for sensitive RO & pharmaceutical process lines

10~20μm: General-purpose bulk sediment removal for standard industrial & municipal water pre-treatment

50~100μm: Coarse primary straining for high-solids raw groundwater and pre-coarse filtration

Final selection is finalized by your raw water analysis data and downstream equipment's filtration threshold requirements.

ANDA supplies consistently high-quality filter cartridges to filter manufacturers and industrial filtration enterprises worldwide. Partner with us to access custom non-standard sizing, private labeling solutions, factory bulk pricing, and tailored water filtration designs developed for your local market demands.

☎ Phone: +8215264322563

✉ Email: bella@anda-filter.com