The continuous polypropylene fiber produced by melt-blast process is wound with polypropylene as raw material
High filtration accuracy, large flow, uniform structure, large amount of pollution, long service life
Have good chemical compatibility, without any additives, the fiber is not easy to fall off
Widely used
High waste interception capacity
In the deep layer of the whole filter element, the effect of capturing particles by density classification is realized, so that the effectiveness of the filter element can be fully exerted.
Higher waste interception capacity means longer service life, lower replacement frequency and cost savings;
The surface density of the filter element is low, while the density increases gradually from the surface to the center of the filter element.
There are no surface blind spots that will reduce the flow rate of the filter element and increase the replacement frequency.
Pure polypropylene structure
High temperature bonding fiber;
Does not contain moisturizing agent, antistatic agent and binder;
Extensive chemical endurance;
Easy to dispose after incineration into ash;
Comply with FDA food and beverage industry requirements;
No dissolved or released matter is produced.
Technical parameters
Filtering accuracy: 1 mm, 3 mm, 5 mm, 10 mm, 20 mm, 30 mm, 60 mm;
Applicable P H: 1 ~ 13;
Maximum pressure difference: forward 0.4mpa;
Operating temperature: 0.25mpa, <70°C;
Sterilization: resistant to 126°C, 30 minutes online steam sterilization;
Endotoxin: the water extract of the filtration column was tested by lAL and the endotoxin content was less than 0.5EU/ml.
Hot Tags: PP filter cartridge, China, manufacturers, factory, wholesale, price, in stock, PP Yarn, PP Filter Cartridge
